Cheers guys!
Sorry that ive been off for so long. Unfortunately i had loads of work and could not reach modeling, and my modeling desk got confiscated by my girlfriend, so actually everything was on halt since my last post. I also separated the topics of the design and the actual kit build, solely for procedure order and clarity.
Finally i could start the design on the interior, here is the very first part. The design analogy will follow the CMK's sets since they have their design style, and since i would alter it it would be visible that somehow the sets don't get together. This calls for minor deviation from original, but anyways some adjustments are needed due to scale and simplification. However, i would highly appreciate any photos, films, book titles, articles from newspapers, anything what would help on the design accuracy. since CMK made the majority, i will design only the forward crew section with radio/sonar room and toilette? + rear torpedo room, and maybe even the tower interior. I think everything rest has already been done, correct me if i'm wrong
the very first part that has been made is the bed guard which prevents falling off in the rough seas. So, the voyage begins!
![](http://shrani.si/f/1R/S5/4N5bpeSW/okvir.jpg)
by the way, part looks huge here, however it is long 22,27 mm, 6.3 mm wide and 0.13 mm thin
in the meantime i finished the small valve, the 3.7 mm in diameter, thickness same as before; 0.13
![](http://shrani.si/f/B/4M/PiJh4pt/valve-small.jpg)
any advices or critics are welcome, help me make those parts the best as possible. The very first test print will be made as soon as i finish the valves, and the frame for the parts.
cheers,
Marko