AMP - Accurate Model Parts
SEA => SUBS: Gato => BuSHIPS => Topic started by: Rokket on 25 Apr , 2007, 03:37
-
I've got a drawing for the Balao and Tench, Flood Ports and Valves.
The BMP image is small (1/24" = 1'), but blow it up double size (200%) and it's 1:144 scale, 300% = 1:96, 400% = 1:72, 600% = 1:48
If you don't have the sofrware or equipment to do that, copt it to a sick and take it to Kinko's. They can do it.
There's a scale (ruler) on it to check for scale. For 1:72, three inches on the drawing, will measure out at four inches. For 1:96 one inch equals one inch. For 1:144 three inches on the drawing measures two inches. For 1:48, one inch on drawing measures two inches.
The original drawing was 1:96, so one inch, on the drawing, equals eight feet.
If anyone needs, or wants, this drawing, email me at (at) cox.net>>.
Mike K.
[Old Forum Post]
-
Dear Sir, could you please email a copy of the flood diagram to katalina@iprimus.com.au,many thanks Bill
-
I would love to have one. Many thanks for all you do.
Robert, caliburnus@earthlink.net
-
Thanks, I'd love to have one. Any final word on the Portsmouth limber pattern?
Walt
whaynes@lowcountry.com
-
I went looking for it, and then I realized, this is a repost from the old AMP forum - so I need Mike K. It's Mike K's post originally.
ATTENTION ON DECK! Calling Mike K to the rescue...
-
I'm not sure just where this drawing is. But I'll find it, if any one still needs it. I've also got a bunch of new stuff. Email me at:
<< mikeatingss(AT)cox(DOT)net >>
If you want to save some work, stenciles are available through Nautilus Models, for both Gato/Balao and Tench Class boats.
Mike K.
-
Thanks Mike!
-
Dear Mike
U've got my email:) i alwais lookinf for evryting u got!!!! send me please
u should have my email:)
alessio