Some pictures!
I'm not sure if the oil canning is quite visible but it came out quite subtle and I really like it. That took quite a long time as I had to sand it down, prime it to check the result, do some sanding, prime again...
![](http://i1139.photobucket.com/albums/n543/n_bracco/12200927_10153776863474189_2073127201_n.jpg)
![](http://i1139.photobucket.com/albums/n543/n_bracco/12207661_10153776863584189_1304423929_n.jpg)
![](http://i1139.photobucket.com/albums/n543/n_bracco/12205061_10153776863634189_1388500892_n.jpg)
Now on to the very crude P-hull and ribs. For my it is quite hard to go into some detail with this parts and very little will be visible through the flood holes. The piping is still to be done and the area around the torpedo loading hatch once I get some idea of how it should look. I'll try to go into finer detail there as it'll be visible through the open deck plates.
![](http://i1139.photobucket.com/albums/n543/n_bracco/12202302_10153776863534189_333017583_n.jpg)
Finally, the deck. I had to sand down the underside to open each hole. This was quite a scary operation as the parts end up being very thin and fragile. That's why I plan to reinforce them with some wire bars on the underside.
![](http://i1139.photobucket.com/albums/n543/n_bracco/12207753_10153776863419189_1927874868_n.jpg)
![](http://i1139.photobucket.com/albums/n543/n_bracco/12212381_10153776863104189_824462364_n.jpg)
That's all for now, I guess the boat will remain as it is until I come back from my travels in June next year!
Cheers,
Nicolás